Driveway Cleaner for Natural Stone, Block Paving, Resin Bonded & Tarmac - 1L
Non Toxic, Pre-treatment to Remove Pollutants, Grime. & Oil Based Residue, Safe & Easy to use
Remove Dirt and Stains from Driveways
Effective driveway cleaner and block paving cleaner for best results when pressure washing driveways.
Dilute at a ratio of approx 1 to 4 or 1 to 5 to create 4 to 5 litres of cleaning fluid (which will cover approx 25 mē of paving)
Dampen surface, then apply product by either sprayer or watering can. For best results, once applied, work into surface with a stiff broom and leave for 20 minutes, then clean surface normally with pressure washer.
KEY PROPERTIES
- Fast acting biological degreaser
- Biologically accelerates the degradation of oil and general stains
- Converts oil into harmless CO2 and water
- Contains Euro Type 1 bacteria non-pathogenic and harmless to humans
- Not flammable, combustible or corrosive
- Will not contribute to surface erosion
- Fully biodegradable: > 90% in 28 days
- For Oil Removal use at 4% dilution
- Not classified as hazardous at recommended dilutions
A driveway cleaner that will quickly remove dirt and grime from block paving, concrete, tarmac & natural stone
Q: I need to clean my patio, but also need to re-grout in between the paving stones as well, is recommended to clean with this product before or after re-grouting
A: Although the driveway cleaner can be used to clean the surface of light dirt and grime, you may also want to consider using the patio cleaner xtreme. Patio cleaner Xtreme is a more aggresive cleaner and will remove tough ingrained dirt stains and light algae. If you have grout residue stains it would be best to use the residue remover.
Q: Will this work on outdoor slate slabs?
A: The Driveway Cleaner can be used to clean dirt, grime and light bird staining from outdoor slate slabs
Q: Hi Does this work on synthetic engine oil on a block paving driveway ? Thanks
A: The Driveway Cleaner is not formulated to work as a synthetic oil remover on block paving, although it may help reduce the severity of the stain. We have developed an oil and grease remover for block paving and other surfaces that should be availble in the near future, and would be a better product to use in this situation.
I diluted it to 1 in 4 and the cleaner did a very good job.
Very good product which did an excellent job of cleaning my drive, prior to resealing.
The drive cleaner for block paving did not remove all the staining but overall did good job