Fast Delivery
Nationwide
#1 Top rated cleaning supplier
on trustpilot
UK Manufactured
since 2008
Product Reviews
Wish to leave a review?
Write a review
Your Rating:
* All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.

Multi Surface Cleaner for Patios, Driveways, Walls, Paths & Roofs

Professional Grade Cleaner Formulated for the Quick Removal of Lichens, algae and General Surface Staining - for Natural Stone, Block Paving, Paving Slabs & More

Paypal
Visa
Visa Electron
MasterCard
Maestro
Product Description

Smartseal Xtreme Multi Surface Cleaner is a professional grade multi-surface cleaner specially formulated for the quick removal of black lichen, mould, mildew, green algae and general surface staining from most external hard surfaces.

Suitable for use on:

  • Concrete & Block Paved Driveways
  • Natural Stone Patios including Sandstone, Limestone, Granite & Slate
  • Wooden Decking & Garden Furniture
  • Composite Decking
  • Roof Tiles
  • Brickwork & Masonry
  • Flagstones

It is used widely by many commercial cleaning companies to clean external hard surfaces without the need for intensive pressure washing. It's an easy to apply, fast-acting formulation, that leaves outstanding results and makes hard surface cleaning easier than ever before. This powerful alkaline cleaner can be used on concrete and most types of natural stone without risk of damage to the surface. 

In most cases, a dilution ratio of 1:1 is sufficient to get outstanding results but in cases of heavier surface contamination, the product can be applied neat.

Technical

DIRECTIONS FOR USE:

1. To avoid damage to vegetation, saturate surrounding areas with water before and after applying product.
2. For best results DILUTE AT A RATIO OF 1:1 and apply by sprayer or watering can in temperatures above 5C and to avoid fast evaporation, no higher than 22C.
3. On heavily soiled areas or areas contaminated with black spot work in with hand brush or broom. Leave on the surface for 1-2 hours.
4. Rinse off with clean water or pressure washer, removing any residue of the cleaning solution.
5. In areas of very heavy soiling apply undiluted and if required re-apply, repeating process above leaving for a longer period (2-3hrs).

COVERAGE:

Up to 160m per 20L container when diluted 1:1

***Once opened, product potency will start to reduce after 3 months***

IMPORTANT: CONTAINS CHLORINE AS AN ACTIVE INGREDIENT AND WILL STAIN FABRICS AND SENSITIVE MATERIALS. TAKE CARE TO AVOID CONTACT WITH FABRICS DURING APPLICATION. TOXIC TO AQUATIC LIFE. AVOID CONTACT WITH LAWNED AREAS. WEAR PROTECTIVE GLOVES AS WILL CAUSE SKIN BURNS. WEAR PROTECTIVE GOOGLES TO AVOID CONTACT WITH EYES

See SDS for full health and safety information.

Product FAQs

Q: I have a sheet metal powder coated roof to clean. Covered in green and black algae appropriately 500m2 what would you recommend I use and the suggestions on the application would be appreciated. Many thanks Phil

Phil Dale

A: The Xtreme Multi-Surface could discolour the metal on the roof. You would be safer to use our Green Clear Pro, as that will not harm your roof and do a great job in removing green growth.

Response from Alex

Q: Do you have a product suitable for cleaning KREND render?

Martin

A: The Xtreme Multi-Surface Cleaner is formulated to be used on K-Rend, without causing any harm to the surface. It will do a fantastic job on cleaning algae, blackspot, lichen and general dirt and grime.

Response from Ricky
Ask Us A Question
Send us a question
Share this product
 
COMPARISON BASKET COMPARE