Graffiti Remover

Surfaces affected by Graffiti can be safely and effectively restored using Smartseal's powerful, solvent-based, Premium Graffiti Remover, which removes spray paint, ink, and marker without causing damage to the underlying surface. If surfaces are not treated, Graffiti and other contaminants can significantly impact both the appearance and long-term condition of those areas if not properly removed. Smartseal's Premium Graffiti Remover is formulated to break down and lift graffiti from the surface, allowing it to be easily removed without the need for aggressive cleaning methods. With the use of the Premium Graffiti remover, you will minimise surface abrasion and reduce the risk of etching, discolouration, or surface deterioration. Regular use of the Smartseal Graffiti Remover helps maintain and clean surfaces, reducing long-term maintenance requirements and preserving the original appearance of the substrate.

Suitable For:

• Graffiti
• Paint & Varnish
• Sealer
• Artex
• Stains & Lacquer
• Carpet Adhesive Residue

Benefits:

• Water Based and Non-Flammable
• Non-Corrosive
• Fast Acting
• Eco-Friendly, Low VOC
• Effective on most substrates
• Ready to apply & Easy application
• Removes Spray paints, base-coats & inks
• Suitable for porous substrates

For Plastics and painted/coated finishes, test on a small area first to determine suitability. Apply liberally to the affected area using a brush, roller, or sprayer. Allow the graffiti remover to dwell for 3-5 minutes (do not allow to dry). On porous substrates work in with a stiff brush or for smooth surfaces, use a cloth/sponge pad. Wash off with water or pressure washer. Repeat the steps if necessary for heavy or aged graffiti.

APPLICATION

Ready to use and should not be diluted. Ensure the surface is completely dry before application. Cover container lid with a cloth during opening to avoid splashes. Layer a generous, even coat onto the surface using a clean brush or airless spray (rollers can be used for light coatings) DO NOT BRUSH OUT Leave for the recommended timing dependant on the stripping guide and apply a second generous coat. (On less than five layers of Paint or Varnish, a second coat may not be necessary). After the product has penetrated the substrate (up to 24 hours) scrape off with suitable scrapers, leaving surface as clean as possible. Rinse clean with cold water containing detergent and a stainless steel scourer, leave to dry. Never use steel wool, stainless steel only.

Guide to Stripping Times

• Graffiti: 5 minutes - 2 Hours
• Varnish: 10 - 30 minutes
• Sealer: 15 - 90 minutes
• Paint: 5 - 30 minutes
• Two pack varnish: 15 - 90 minutes
• Heavy multi-layered paint: 45 minutes - 12 hours
• Two pack lacquer: 15 minutes - 12 Hours
• Artex: 30 minutes - 2 Hours

RECOMMENDATIONS:
Store sealed in a cool place away from direct sunlight. Once opened, use entire contents as soon as possible.
Do not apply to Damp Surfaces or at temperatures below 7°C.

APPLICATION:
Application by sprayer, roller or brush - do not allow to dry.

HEALTH & SAFETY:
Wear appropriate safety wear at all times. Technical data sheets and additional technical information is available upon request.