Paint & Varnish Stripper
Smartseal's Premium Paint & Varnish Stripper is a High Performance Paint Stripper for the removal of multiple layers of Paint, Varnish & Lacquer. The Heavy Duty Paint & Varnish Stripper is suited for both internal & external use, removing the above finishes from Concrete, Masonry, Brick, Metal & Wood.
Benefits:
- Easy to Use
- Non-Corrosive
- Water Based
- Biodegradable
- Low VOC
The Smartseal Premium Paint & Varnish Stripper is a Powerful, Ready to use, Fast Acting solution to your Paint & Varnish stripping needs.
For Plastics and painted/coated finishes, test on a small area first to determine suitability. On porous substrates work in with a stiff brush or for smooth surfaces, use a cloth/sponge pad. Wash off with water or pressure washer. Repeat the steps if necessary for heavy or aged surfaces.
APPLICATION
Ready to use and should not be diluted. Ensure the surface is completely dry before application. Cover container lid with a cloth during opening to avoid splashes. Layer a generous, even coat onto the surface using a clean brush or airless spray (rollers can be used for light coatings) DO NOT BRUSH OUT Leave for the recommended timing dependant on the stripping guide and apply a second generous coat. (On less than five layers of Paint or Varnish, a second coat may not be necessary). After the product has penetrated the substrate (up to 24 hours) scrape off with suitable scrapers, leaving surface as clean as possible. Rinse clean with cold water containing detergent and a stainless steel scourer, leave to dry. Never use steel wool, stainless steel only.
Guide to Stripping Times
- Graffiti: 5 minutes - 2 Hours
- Varnish: 10 - 30 minutes
- Sealer: 15 - 90 minutes
- Paint: 5 - 30 minutes
- Two pack varnish: 15 - 90 minutes
- Heavy multi-layered paint: 45 minutes - 12 hours
- Two pack lacquer: 15 minutes - 12 Hours
- Artex: 30 minutes - 2 Hours
RECOMMENDATIONS:
Store sealed in a cool place away from direct sunlight. Once opened, use entire contents as soon as possible.
Do not apply to Damp Surfaces or at temperatures below 7°C.
APPLICATION:
Application by sprayer, roller or brush - do not allow to dry.
HEALTH & SAFETY:
Wear appropriate safety wear at all times. Technical data sheets and additional technical information is available upon request.
Q: Will this remove pliolite paint from concrete?
A: The Paint & Varnish Stripper will remove most solvent and non-solvent paints from concrete. It hasnt been specifically tested for pliolite paint so we could not say 100% for sure, but there is a good chance it will remove the paint in question.
Q: Will this work on one pack resin lining paint thanks
A: The Paint & Varnish Stripper can be used succesfully on most paint types. However, if its an epoxy coating or similar it may not work as well as on normal solvent or solvent free paints and varnishes
Q: Does this actually work on block paving We have lots of paint spills from previous owners when painting the house. The block paving was power washed professionally but now show up all the white paint
A: The Paint & Varnish Stripper is suitable for use on block paving.