Premium Sealer Stripper
Removes Most Types of Sealers & Paints from Concrete, Brickwork, Stone, Wood & Plastic
Smartseal's Premium Sealer Stripper is a ready to apply, Powerful, Professional formula suited for both external & internal use. This Premium Sealer Stripper Removes Solvent and Non-Solvent Acrylic Sealers from a wide range of surfaces. The Sealer Stripper is an Easy to Use, Non-Corrosive Formula suitable for Concrete, Natural Stone, Imprinted Concrete, Wood, Plastic, Stone & More.
*Not Suitable For Removing Impregnating Sealers*
Benefits:
- Ready To Use
- Powerful Formula
- Fast Acting
- Non-Corrosive
- External & Internal Use
- Removes Sealers & Paints
Ideal for use on Driveways, Patios & Paths.
APPLICATION
Ready to use and should not be diluted. Ensure the surface is completely dry before application. Cover container lid with a cloth during opening to avoid splashes. Layer a generous, even coat onto the surface using a clean brush or airless spray (rollers can be used for light coatings) DO NOT BRUSH OUT Leave for the recommended timing dependant on the stripping guide and apply a second generous coat. Rinse clean with cold water containing detergent and a stainless steel scourer, leave to dry. Never use steel wool, stainless steel only.
Guide to Stripping Times
- Graffiti: 5 minutes - 2 Hours
- Varnish: 10 - 30 minutes
- Sealer: 15 - 90 minutes
- Paint: 5 - 30 minutes
- Two pack varnish: 15 - 90 minutes
- Heavy multi-layered paint: 45 minutes - 12 hours
- Two pack lacquer: 15 minutes - 12 Hours
- Artex: 30 minutes - 2 Hours
RECOMMENDATIONS:
Store sealed in a cool place away from direct sunlight. Once opened, use entire contents as soon as possible.
Do not apply to Damp Surfaces or at temperatures below 7°C.
APPLICATION:
Application by sprayer, roller or brush - do not allow to dry.
HEALTH & SAFETY:
Wear appropriate safety wear at all times. Technical data sheets and additional technical information is available upon request.
Q: Ho much does a 1 litre tub do for two coats
A: There is no accurate coverage for the sealer stripper as the amount used will vary considerably depending on the amount of sealer you are trying to remove. For small areas of les than 5sqm, 1L of the sealer stripper is usually sufficient.
Q: I applied a test patch for a customer on an imprinted concrete drive, unfortunately the colour was too dark. Will this sealer stripper remove the colour tint and sealer?
A: Thanks for the question. Certainly try a test area first as this will look to strip the surface back very well. I would recommend pressure washing the surface beforehand to see if that works for the test area.
Q: I applied a test patch for a customer on an imprinted concrete drive, unfortunately the colour was too dark. Will this sealer stripper remove the colour tint and sealer?
A: Thanks for the question. It should do, I would look to use a test sample as this very strong sealer stripper can look to strip it back to the foundations of the concrete, so be very careful. I would advise pressure washing the surface first.