Imprinted Concrete Sealing Broom for Driveways and Patios 10" soft broom for sealing pattern imprinted concrete (supplied with handle). Allows application of sealer directly from drum. Prior to use pull on broom hairs and work over hard surface to remove any loose ones. Can be re-used at anytime in future, allow to dry naturally, broom hairs will harden once dry. Prior to re-use submerge in sealer for 10 minutes, hairs will soften, allowing re-usage.
*See technical section below for full instructions and tips prior to use.
Once purchased, you will only require one sealing broom, but 1st time it is used, often like any natural hair broom, it will shed hair.
Application by plastic hair broom or roller is not advised, use of roller will tend to leave excess sealer in the joints, which can create problems.
Please follow instructions below prior to use.
1. Prior to using rub broom head on abrasive surface and pull out loose hairs.
2. During use, if you are using Colour Tint or Anti Slip Additive, stir reguarly and let broom 'hit' bottom of drum, to keep additives suspended.
3. After use, do not attempt to clean broom, just leave to dry.
4. When you are ready to use broom again, whether it is 1 day, 3 months or 5 years, just leave immersed in sealer for 5 minutes, it will soften up again and be ready for use.
It is that simple, the broom works great for applying imprinted concrete sealer, enabling you to use the product sparingly and not leaving any excess in the joints.
In summary, your sealing broom will literally last forever, you just need to get rid of any loose hairs, prior to use. If a few hairs still get stuck in the surface, do not worry, they will soon be released as the initial 'tackiness' of the sealer diminishes.
The broom did the job, but I think it could be better quality. There was loose bristles dried up on the concrete after applying the sealer onto the surface. Apart from this the broom gets well into the imprinted concrete. My driveway looks nice now. Thanks again.
Just clean the sealing brush head before you use to remove all loose bristles from the broom head Spot On!!!!!!!! Spot On!!!!!! SpotOn!!!!!!!!!!
The broom was the right tool for the job although I did try to brush it first to remove the loose bristles but some still came out when I was applying the sealer