Cold Lay Repair Tarmac / Asphalt (12.5 kg & 0.25 ltrs primer) - Available in BLACK or RED - Repairs Holes in Tarmac and Asphalt Surfaces
Ask Us A Question
Repairs Holes in Tarmac and Asphalt Surfaces
Smartseal Tarmac/Asphalt Cold Lay Repair is carefully formulated for ease of use and to give good results for small repairs to holes or cracks. It is very easy to use directly from the container. First, apply the included 0.25 litre primer to the damaged area and then simply compact the Tarmac into place by hand. AVAILABLE IN BLACK OR RED.
Once the tarmac repair is complete, Tarmaseal repair coating can be applied to the area straight away.
For additional advice, please call 01268 722505 or visit our dedicated Tarmac Repair website.
Smartseal Cold Lay Tarmac is ready to use quick, cost-effective repairs to paths and driveways.
Simple to use, No specialist tools or equipment are required
Ensure the area where the cold lay repair is to be laid is clean and dry.
Apply the included 0.25 litre Primer to the area to be repaired.
Use an ordinary rake, spade or trowel to spread the
cold lay repair. Leave approx 10mm higher than damaged area to allow
Use a heavy, flat object for 'tamping' Wet the tamper frequently to avoid the cold lay
repair sticking to the tool.
When repairing deep pot-holes (greater than 30mm) lay the cold lay repair in two stages.
Thoroughly compact the first layer to 20mm and leave for 24 hours. Then thoroughly compact
second layer to the required level. Allow the repair tarmac to harden fully.
It is not recommended to use product in temperatures below 10o
After prolonged storage, it may be necessary to expose the cold lay tarmac to direct sunlight
for 1-2 hours prior to opening to soften the material and restore workability.
Coverage rates will vary greatly relative to depth of potholes
See How to and step by step guides on www.smartseal.co.uk for further instructions.