Cold Lay Repair Tarmac / Asphalt (12.5 kg & 0.25 ltrs primer)
Available in BLACK or RED - Repairs Holes in Tarmac and Asphalt Surfaces. Easy, effective, cold repair to holes and cracks in tarmac / asphalt
Repairs Holes in Tarmac and Asphalt Surfaces
Smartseal Tarmac/Asphalt Cold Lay Repair is carefully formulated for ease of use and to give good results for small repairs to holes or cracks. It is very easy to use directly from the container. First, apply the included 0.25 litre primer to the damaged area and then simply compact the Tarmac into place by hand. AVAILABLE IN BLACK OR RED.
Once the tarmac repair is complete, Tarmaseal repair coating can be applied to the area straight away.
For additional advice, please call 01268 722505 or visit our dedicated Tarmac Repair website.
Smartseal Cold Lay Tarmac is ready to use quick, cost-effective repairs to paths and driveways.
Simple to use, No specialist tools or equipment are required
Preparation
Ensure the area where the cold lay repair is to be laid is clean and dry.
Application
Apply the included 0.25 litre Primer to the area to be repaired.
Use an ordinary rake, spade or trowel to spread the
cold lay repair. Leave approx 10mm higher than damaged area to allow
maximum compaction
Use a heavy, flat object for 'tamping' Wet the tamper frequently to avoid the cold lay
repair sticking to the tool.
When repairing deep pot-holes (greater than 30mm) lay the cold lay repair in two stages.
Thoroughly compact the first layer to 20mm and leave for 24 hours. Then thoroughly compact
second layer to the required level. Allow the repair tarmac to harden fully.
It is not recommended to use product in temperatures below 10o
PLEASE NOTE:
After prolonged storage, it may be necessary to expose the cold lay tarmac to direct sunlight
for 1-2 hours prior to opening to soften the material and restore workability.
Coverage rates will vary greatly relative to depth of potholes
See How to and step by step guides on www.smartseal.co.uk for further instructions.
Q: What is the coverage per m2?
A: There is no specific coverage ratio as there ae to many variables for the crack or pothole you're trying to repair with the Cold Lay Repair Tarmac / Asphalt.
Q: What is the best application tool to apply this product?
A: Any tool that can be used to compact the cold lay will be suitable. We have found using a hammer and bolster to be effective.
Q: Should I use Cold Lay Repair Tarmac or Crack Repair Compound for a pot hole on my Tarmac drive?
A: For larger sized or deeper holes (i.e. potholes) you will require the cold lay tarmac. The Crack Repair product is designed for smaller, shallower cracks/holes.
The product works well for repairing small areas of tarmac and if properly tamped down lasts for years. The only drawback is it's difficult to break up in the tub in order to apply it.
Efficient and helpful service from snartseal. The tarmac repair sealant is in tub. Easy to lay by an amateur like me and highly recommended
First time using this tarmac repair product. Car drove on restored area tarmaseal did not lift. Great product will use again. Paul