Superior Satin Sealer (1L & 5L)
Durable & protective wet look sealer for natural stone. Easy to apply stone sealer, that protects against oil, wine & water based stains. Formulated for use on slate, sandstone, terracotta, travertine & limestone floors. Durable stone sealer for worktops.
WET LOOK SEALER FOR NATURAL STONE
The Natural Stone Superior Satin Sealer provides lasting protection for natural stone floors, walls & worktops. The wet look stone sealer will enhance the look and appearance of most* natural stone floors and walls, such as Slate, Sandstone, Limestone, Travertine, Granite and Terrazzo.
- Suitable for most types of natural stone
- Best on rough and absorbent surfaces
- Enhances natural colours
- Use indoors or outdoors
The Superior Satin Sealer is a water-based gloss finish protective sealer that creates a durable, crystal clear gloss finish. It is frequently used on internal and external floor tiles. It is a wet look sealer for slate, terracotta, quarry and Victorian tiles. It can also be used on brick pavers, sandstone and many more textured stone or masonry surfaces.
Superior Satin Sealer is quick drying and easy to apply and will protect the applied surface against oil and water-based stains.
*Not recommended for use on highly polished stone & ceramic glazed surfaces. Not recommended for use on marble. For marble, please use Natural Stone Impregnator - Solvent-based.
COVERAGE
Up to 25mē per litre, dependant on porosity of surface
Please note, before using the Superior Satin Sealer, make sure the surface is clean and dry. For areas of dirt and ingrained grime use the Heavy Duty Tile & Stone Cleaner. If the grouting needs cleaning use Grout Cleaner to remove any dirt. To ensure the grout looks like new or if you want to change the grout colour, use Grout Magic.
DIRECTIONS FOR USE
1) Before application make sure the surface is completely dry, clean and free from debris.
2) Apply the product thinly and evenly with a low pressure sprayer and microfibre mop, paint brush or soft cloth, taking care not to leave application marks or allowing the product to puddle on the surface.
3) Allow 45-60 minutes drying time before applying the second coat, repeating the same process apply the product in the opposite direction to help to achieve an even consistent finish. If necessary more coats can be applied to achieve the desired finish.
Please Note: Surfaces which are not to be sealed must be protected with masking material. Always test product in an inconspicuous area to determine suitability for intended use.
MAINTENANCE
To keep the treated areas looking good at all times use the pH Neutral Tile & Stone Cleaner. Do not use abrasive cleaning agents as they can damage the surface of the stone being treated.
Q: will this be okay for porcelain kitchen tiles
A: We only have one product we would recommend for porcelain, which is our Porcelain Sealer. The Superior Satin Sealer wouldn't be compatible for your surface.
Fantastic product. The sealer was easy to apply. Great results.
Worked nicely. Gave it 2 coats at 90 brushstrokes as instructed. It really brought out the colours from our fossil limestone bathroom tiles a lot better than the previous sealer we used. The only reason I've left one star off is that it didn't quite have as much effect on the surface as I'd hoped. We have a line of clear silicone sealant between the side of our shower enclosure and the limestone. The silicone has brought out a real depth of colour from the surface. I was hoping that this sealant would match it. While it's a lot more close than it was before, it is still easy to see the deeper colour of the tiles where the silicone sealant is. Will apply again in a year and hoping that another 2 coats will help.
Difficult to get wildly excited about this type of sealing product. Tempted to say 'It does exactly what it says on the tin' but I believe that is subject to copyright. Easy to apply and seems to do the job.