Clay Tile Sealer - Enhanced Finish (Available in 1 & 5 litre)
There are currently no reviews for this product.
Be the first to write a review.
Smartseal Clay tile Sealer is a high quality, clear, solvent free acrylic impregnating system. Application of the sealer will alter the chemical structure of the porous limestone providing an excellent water repellent and stain resistant surface. Suitable for clay pavers and clay roof tiles
One coat application
1 x 5 litre will treat up to 60 m2
Highly resistant to algae, lichen and staining
Will leave surface 'damp' or 'wet' looking.
Average coverage 10 m2 per litre
Application by roller or sprayer or suitable cloth
Touch dry 2-3 hours
Fully waterproof 24 hours
Lifespan up to 5 years
Suitable for Clay tiles or pavers, externally or internally
PREPARATION: Prior to application of clay tile sealer or natural stone sealer ensure surfaces to be sealed are clean, dry and free from contamination. If algae or stains are present pre treat prior to cleaning with a appropriate cleaning product.
APPLICATION: A suitable pressure sprayer or roller is recommended taking care to avoid any pooling. Application on vertical surfaces should be to full
saturation commencing at the bottom and working upwards. For internal surfaces application by a suitable cloth is appropriate. Remove any excess after 20/30 minutes.
One application is normally required, do not apply in damp conditions at temperatures below 5°C. Shake container well before use.
All equipment should be cleaned with water immediately after use.
Finish may vary according to the type of stone applied to
Always apply to a test area first
SHELF LIFE: Store away from direct sunlight and sources of heat. Protect from frost.
12 months (in original sealed container).