Fast Delivery
Nationwide
#1 Top rated cleaning supplier
on trustpilot
UK Manufactured
since 2008
Product Reviews
By James GillamFROM Dulverton

Excellent product. Easy to apply and fast working. Ideal for porcelain.

By Martin Kelly

Good sealer for porcelain

Wish to leave a review?
Write a review
Your Rating:
* All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.

Porcelain Sealer - One Coat - Stain & Scratch Resistant

Easy application, 100% breathable. Advanced, Nano-coating sealer. Safe, low-odour formula. Coverage: 10 - 20 m²/litre

Paypal
Visa
Visa Electron
MasterCard
Maestro
Product Description

Smartseal Porcelain Sealer is a hard wearing, breathable, protective coating for modern internal & external porcelain tiles. The porcelain tile sealer can also be used on ceramic wall and floor tiles. Furthermore, it helps to prevent general soiling & surface staining. Although this is not a cosmetic product, it does act as a colour enhancer and leaves a subtle wet look sheen once dry. However, its main purpose is to make cleaning and maintenance easier.

Smartseal Porcelain Sealer is a ready to use, easy to apply, quick-drying formulation that gives additional protection oil and water-based stains whilst enhancing the natural colours of the tiles. Once applied the porcelain tiles sealer will make cleaning and maintenance of porcelain surfaces much easier. WE DO NOT RECOMMENDED USING ON HIGHLY POLISHED SURFACES.

FEATURES

  • Suitable for use on porcelain and ceramic tiles
  • Strictly a single-coat application
  • Leaves a subtle wet look sheen once dry 
  • Enhances the colours of the tiling
  • Can be used externally on patios
  • Also for use on walls and floors internally
  • Ultra-durable sealer for long term protection

Formula is ready to use, quick drying and easy to apply.

Average coverage: 10 - 20m per litre, dependant on surface texture and porosity.

Technical

Application temperature range: 10 to 23C

Directions for Use:

Always apply to a test area or spare tile first.

Only apply to completely dry and clean surfaces.

**If applied to a surface where a "sweep-in" pointing compound has been used within the last 6 months, the porcelain must be fully cleaned with Smartseal Residue Remover prior to sealant application.**

Apply a single thin, consistent coat, with a microfibre cloth, microfibre flat mop or paint pad. Avoid application marks and excess pooling of sealer.

Please note:

This formulation is strictly a single coat application, because it is a high active micro coating that bonds very strongly to the impervious porcelain.

It is not a cosmetic product. Although it does make the treated surfaces look more attractive, its main purpose is to aid easier cleaning and maintenance.

Applying more than one coat to achieve the "desired appearance" will almost definitely result in application issues and product failure.

Given the above, it is important the exact application instructions are followed.


  • Allow a minimum of 2 hours drying time before walking on. The sealer will be fully-cured and attain full water-resistance after 24 hours.

  • If using externally, do not apply if rain is forecast within 8 hours.

  • Average coverage 10-20m per litre. Coverage will vary depending on surface texture and porosity.

  • Store in cool, dry conditions out of direct sunlight in original container only. USE WITHIN 6 MONTHS OF PURCHASE & WITHIN 3 MONTHS ONCE OPENED.
Product FAQs

Q: We have applied the sealer onto our newly installed procelain patio which looks pretty good but the rain water stays or sits onto the tile like big water drops after rain, and it takes probably 1 to 2 days before they got dry, it also has tear lines like on the tiles when dried. We use micro fibre cloth on application.

Irene

A: The beading like 'waxing a car' effect, will pass relatively quicky as the resiins in the sealer 'settle down' The lines would have been created by slightly inconsistent application with a small amount of the sealer being unable to pentrate into the porcelain. We would suggest try a sample of our 'Residue Remover' apply with a cloth and try to remove the excess. Hope that helps.

Response from Nigel

Q: my porcelain patio flags are a matt and slightly rough texture - we want them to be a wet look / sheen. Will a sponge not rub off and leave sponge residue ? Could we use a roller with a fine sponge roller head thanks in advance

RIchard Harrison

A: We would suggest trying a sample on a test area 1st. We would still suggest, sponge, mop or cloth is better than a roller, which is likely to leave a inconsistent finish. Hope that helps.

Response from Josh

Q: I have a small hairline crack in my kitchen and wetroom. Can I use this to seal it in the effected area?

Shane

A: The porcelain sealer is not of a viscosity that will fill cracks. You could try a sample and see if sealing it helps.

Response from Nigel
READ MORE QUESTIONS
Ask Us A Question
Send us a question
Share this product
 
COMPARISON BASKET COMPARE