Smartseal Tarmac Liquid Crack Filler is a flexible rubberised bitumen solution, specially formulated to ensure small cracks in tarmac and asphalt do not become potholes.
Cracks in Tarmac and Asphalt not only look unsightly but also allow water to penetrate, causing damage and rapidly reducing the lifespan of the surface. SmartSeal Tarmac Liquid Crack Filler is rapid drying, long-lasting repair for cracks in tarmac and asphalt surfaces. Designed for effortless application, the liquid tarmac crack repair is a flexible solution that makes surface crack repairs in tarmac fast and simple.
The liquid crack filler for tarmac is easy to apply; just pour the quick drying liquid repair compound from a spouted container into cracks up to 25mm wide.
The liquid tarmac crack filler can be used to repair cracks in a range of surfaces such as:
- Driveways & Paths
- Car Parks
- Tennis Courts
- Playgrounds
Benefits:
- Easy to Apply
- Rapid Curing
- Flexible Filler
- Fills Cracks 1mm-25mm Wide
- High Strength Formula
Preparation
Very little preparation to the surface of the tarmac or asphalt is required as Smartseal Tarmac Liquid Crack Filler is extremely easy to use. Prior to filling just ensure any loose dirt, organic growth or aggregate is scraped out from the crack. Do not use in wet or cold conditions below 5°C
Application:
Mix the tarmac crack filler well before and decant the liquid into a spouted jug. For cracks up to 3mm, sweep or scrape out loose debris and pour into the cracks using the spouted jug. For cracks 3mm - 25mm wide: prime the sides of the crack with a thin coat of the crack filler. Mix the liquid tarmac crack filler with damp sand to produce a slightly stiff mortar and paste into the crack. Smooth off and allow to dry.
Drying time will depend on weather conditions and the size of the crack being repaired. Allow approximately 24 hours for cracks up to 3mm and an average of 8-10 hours for cracks around 25mm. Try to ensure the surrounding temperature is warm and dry to avoid possible complications. Although some dampness can be tolerated, it is always best for the crack being repaired to reasonably dry during the application of the liquid crack filler for tarmac.