Fast Delivery
Nationwide
#1 Top rated cleaning supplier
on trustpilot
UK Manufactured
since 2008
Sealer Colour Tints for Imprinted Concrete Sealer (500g or 30g sample)
Sample Available
Product Reviews
By Alan Moore

Got as near to my existing colour of my imprinted concrete drive as possible by gradually adding colour tint and testing on small areas first.

By Derek Taylor

Good product easy to use when mixed with imprinted concrete sealer no problem to apply would recommend Smart seal products with no hesitation.

By Tony Lees

Used half a tub of colour to 25litre Matt for first coat, covered the faded concrete brilliantly, used say22litres on first coat, then topped up with about 15litres of sealer for second coat, over the moon with the result just got to. do top silk coat.

READ MORE REVIEWS
Wish to leave a review?
Write a review
Your Rating:
* All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.

Sealer Colour Tints for Imprinted Concrete Sealer (500g or 30g sample)

Highly Concentrated Powder Pigment - Use Sparingly. For use with Imprinted Concrete Sealers (20 colours)

Paypal
Visa
Visa Electron
MasterCard
Maestro
Product Description

Colour Tints to restore original colour to Imprinted Concrete surfaces.

Add sparingly directly to sealer, until desired colour is achieved (always apply on a small test area first). Agitate regularly during application. 

Only recommended to be used in combination with Smartseal MATT finish sealer.

WARNING: Unnecessary use, or too much colour added to sealer can cause peeling or flaking.

Only use with solvent based imprinted concrete sealer to bring back original colouring of driveway or patio.

Colours Available

Colour Chart

Product FAQs

Q: Hi do you have any pictures of the slate grey and steel grey side by side so I can see the difference in shade between them? Thanks

Usman

A: Thanks for the question. We have a colour chart on the pictures on the website. Alternatively, it is best to try a sample of the tint as the ratios of colour can differ dependent on how much is added to the sealer.

Response from George

Q: Hi, can the colour pigment be added to the wet/silk sealant ? Or is it the matt only.

Dave

A: If you are only intending to use a small amount of pigment then you could use the silk sealer. However, we generally recommend using the matt sealer with colour pigment.

Response from Nick

Q: I sm buying 30litres of the concrete seal, how much tint will I need please

Gill Last

A: One 500g tub is usually sufficient for 50 litres, so you would have more than enough with one tub. However, add the tint gradually to ensure you create the depth of colour you need ithout adding too much.

Response from Nick
READ MORE QUESTIONS
Ask Us A Question
Send us a question
Share this product
 
COMPARISON BASKET COMPARE