Fast Delivery
#1 Top rated cleaning supplier
on trustpilot
UK Manufactured
since 2008
Patio ColourSeal - MID GREY (Sample & 5L)
Sample Available
Product Reviews
By Irene Stein

This is the second time Ive used this sealer and what a difference it makes to your patio

By David Blocksidge FROM Sandwell

Just had a sample size to see if it would cover a slabbed patio. That has unslightly finish. The covering was good very easy to work with a roller. Not quite sure about it yet but that has nothing to do with the product. It is first class. would recommend. I may have the wrong colour

By Irene Stein

This is the second time Ive used this product and what a difference it makes to your patio

Wish to leave a review?
Write a review
Your Rating:
* All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.

Patio ColourSeal - MID GREY (Sample & 5L)

Transform, Re-Colour & Restore Old Concrete Paving Slabs, SAVE £000's on Replacement, Easy To Apply, Durable Sealer. Restore or change the appearance of a tired-looking paved area. Long term protection.

Visa Electron
Categories: Patio Sealer
Product Description

A ready to apply pigmented patio sealer suitable for application on most types of concrete paved surfaces. Patio Colour Seal can transform the look and appearance of a tired-looking paved area and make it look new. This DIY friendly product is superior to inexpensive concrete paints and is very easy to apply by roller or brush. Prior to application, all surfaces must be cleaned thoroughly and given sufficient time to dry out completely. After two coats have been applied the transformation should be complete.

Patio Colour Seal can be used to refresh the existing colour of old concrete paving or change it completely to a new colour if necessary. Average coverage is approximately 4mē per litre 1st coat (dependent on the surface) and approximately 5mē 2nd coat. If required, an anti-slip additive can be mixed in with the sealer on the final coat if required. There are various colour options and samples available to test if required.

  • Suitable for most paving slabs including precast concrete.
  • Not for use on imprinted or pressed concrete
  • Hard wearing.
  • Ready to apply straight from the tin.
  • Transforms the look of old concrete paving slabs.
  • Various colour options available.
  • DIY friendly.
  • Makes old paved areas look like new.
  • Samples available for purchase.
Product FAQs

Q: How long does it take to dry?

Pam Kelt

A: Dependent on air temperatures, it is normally touch dry in 1-2 hours. Try to avoid walking on for minimum 4 hours.

Response from Jake

Q: Hi, Is this suitable for a paving slab driveway? And once applied is it ok to pressure wash Thanks


A: The coloured sealer is suitable for any precast concrete patio slabs. If used on a driveway, as you would expect, the trafficed areas could wear faster. Low pressure washing would not reduce the lifespan of the sealer. Samples are available for testing.

Response from Nigel

Q: Hi there, could you confirm the coverage please as some companies get meters squared mixed up with square meters. The description states approx 4m2 per litre for the first coat so is this 16 meters squared i.e. 4m x 4m (which is what 4m2 means) or is it 4 SQM which would be 1m x 4m. Many thanks.

Gavin White

A: If the description of the sealer says coverage 4m2 per litre, that means a 5L container will cover 20m2 Hope That Helps.

Response from George
Ask Us A Question
Send us a question
Share this product