ClimaShield Liquid Rubber (5L) - Instant Waterproofer for Roofs. Lasts up to 10 years. Available in BLACK, GREY or WHITE
A ready-to-use one coat waterproof roof coating with advanced leak seal technology. Easy to apply, it quickly adheres to Asphalt, Bitumen, Concrete, Brickwork, Felt, Metal, Fibreglass, EPDM and Wood.
Climashield Liquid Rubber is an advanced, instant waterproofer for roofs. It has been specifically developed for the refurbishment and renovation of flat roofs as well as overlay applications where greater life expectancy is needed. It is ideal for emergency roof repairs or to carry out pre-planned maintenance. The rapid drying and strong adhesive qualities also makes for quick and effective roof repairs and helps reduce downtime.
The one-coat waterproofing solution and rapid leak sealer guards against water ingress and roof damage. Once applied, the durable, highly elastic waterproof coating offers lasting protection to flat or pitched roofs, walls and gutters. Suitable for most substrates, it quickly adheres to Asphalt, Bitumen, Concrete, Brickwork, Felt, Metal, Fibreglass, EPDM and Wood.
It is suitable for application to both domestic and commercial roofs and can be easily applied by those who like DIY as well as professional tradesmen.
Can easily be used on Sheds, Flat Roofs, Gutters, Roof Tiles, Felt and many more.
BENEFITS
- Instantly Waterproofs
- Highly Elastic Flexible Coating
- Only One Coat Required
- Ready to Use
- Lasts Up to 10 years
- For Use on Multiple Substrates
The cold applied, fluid elastomeric membrane forms a seamless and highly flexible waterproof membrane that will expand and contract with surface movement as well as changes in temperature. It will quickly adhere to most substrates, and exhibits strong adhesive qualities that helps prevent cracking, splitting or peeling over time.
PREPARATION:
Clear any moss, lichen and debris by brushing or pressure washing. Remove any surface water as well as oil and grease contamination. Allow to dry.
APPLICATION:
The substrate and air temperature for application must be between 5°C and 30°C.
Stir well before use. No primer needed. Use straight from the tin. Do not thin down.
Apply generously to the surface, using a brush or solvent resistant roller at a minimum spreading rate of 1m² per litre. Dries in approximately 8 hours and fully cured in 6-7 days.
COVERAGE:
Fully waterproofs in just one coat with a minimum coverage of 1m² per litre.
DURABILITY:
Last up to 10 years.
Q: I have a flat roof EPDM. I need to raise the height in some areas to stop pooling. Can I use this product upto approximately 5mm thick in places?
A: To do that you would probably have to apply 3-4 coats of the ClimaShield Liquid Rubber to create the 5mm thick depth you require. In between each coat it would also be best to let it fully cure first
Q: I have a leak from a failed seam on a EPDM rubber roof. I am planning to use ClimaShield Liquid Rubber to seal the seam. What preparation for EPDM do I need to do? How do I clean the surface? Must it be dry? Should I use it in conjunction with Polyester Flleece? Regards, Keith Garratt
A: To clean the EPDM you should clear all areas of moss, lichen and surface debris by brushing or power washing. You should also remove any surface water, plus any oil or grease contamination. Leave the EPDM to dry, then, as an added precaution, apply a biocide such as Green Clear to prevent any further algae growth. To the dry and cleaned surface, apply a generous coat of ClimaShield Liquid Rubber by brush or roller at a spreading rate of 1m² per litre.