ClimaShield Leak Repair - Instant Leak Sealer & Waterproofer for Roofs & Gutters

ClimaShield Leak Repair is an advanced instant leak fixing formulation for roofs and gutters. The ready to use fibre reinforced leak sealer can even be even be applied in damp or wet conditions. It will adhere to most types of roofing materials, giving lasting durability and great flexibility to previously problematic areas on roofs. Suitable for external use only, it can be used on flat roofs, gutters, lead flashing, metal, slate, asbestos, concrete, asphalt, and roofing felt.

ClimaShield Leak Repair is very versatile and can be used in emergencies such as repairing roof leaks or for completely waterproofing an entire roof area. The ready use leak fix formula can be applied straight from the tin without the need for a primer. It is frequently used by professional tradesmen as well as those keen on DIY.

For added strength and durability ClimaShield Leak Repair is a fibre reinforced formula and single pack elastomeric coating that gives great flexibility that helps prevent cracking and splitting of the surface. The strong roof repair formula also offers excellent adhesion to most types of roofing materials that have been used over the years.

Benefits: 

• Instantly Seals Leaks & Waterproofs - Ideal for emergency repairs and long-term roof maintenance.
• Multi-Surface Use - Can be used on asphalt, bitumen, brick, concrete, stone, tiles, fibreglass, wood, metal and lead flashing
• Easy To Use with No Primer Required - Applied directly from the tin without a primer
• Rapid Drying Formula - Touch dry in 3-4 hours and completely cured within 6-7 days
• Versatile - Can be used to fix leaks on flat or tiles roofs, guttering and lead flashing

SUITABLE SURFACES:
Asphalt, Bitumen, Brick, Concrete, Felt, GRP, Fibreglass, EPDM, Metal and Plastic

PREPARATION:
Ensure any application areas are clean and any dirt, grease or loose material is removed from the surface. Make sure any organic growth that is present, such as mould, green algae or lichen is also removed. Pre-treating these areas with a strong biocide such as Green Clear or Green Clear Pro can help to speed up this process. For best results, make sure to repair any large cracks, holes or blisters on the surface. 

APPLICATION:
Application Temperature should be between 5°C-25°C. In most situations one coat of Climashield Leak Repair sufficient to carry out rapid repairs and stop small leaks on flat roofs and guttering. In some cases, like with new roofing felts, two coats may be necessary. If possible, try to allow newer surfaces to weather for 6-9 months before applying Climashield Leak Repair. For small areas, apply by brush, and for larger areas use a trowel, soft broom or squeegee. Use liberal amounts of product to ensure all problem areas are fully coated and enable the best possible protection against water ingress in the future. DO NOT spread too thickly or thin down. Try to avoid walking on any coated areas until the product is fully cured (Approx 2-3 days). Any application tools can be cleaned with white spirit.

COVERAGE:
1m2 per litre on flat surfaces.

PLEASE NOT: Climashield Leak Repair is an all-weather product for emergency repairs and fixing roof leaks that can even be applied in damp conditions.

STORAGE:
Keep in the original container in a cool, well ventilated area away from direct sunlight. Close and tighten lid when not in use.